Electrical Motor Control Wirings

This blog contains several Electrical Motor Control Wirings, and Operations.

  • Delayed Automatic Forward Reverse Motion of Overhead Crane Driven by a Motor

    This is another situation that requires the overhead crane to rest for a while upon reaching both of the rail. After a pre-determine time the overhead crane will re-start in the opposite direction.

  • Limiting the Forward and Reverse Motion of an overhead crane driven by a motor

    The motion of an overhead crane moving forward and reverse can be automatically stop at both end by placing a limit switches X and Y in the control circuit of the Forward – Reverse Motor Control shown in Figure below (d).

  • Automatic Forward and Reverse Motion of Overhead Crane Driven by a Motor

    Notice that when contact (1-2) of limit switch X opens to de-energized contactor F, its contact (1-3) will almost simultaneously closed to energized the contactor R. This will bring about the automatic reversal of the overhead crane from the left to the right.

  • Forward Reverse Motor Control

    The forward reverse motor control is used i a system where forward and backward or upward and downward movement in the operation are needed.

  • WYE-DELTA REDUCE VOLTAGE STARTER

    Some motors starters at high current more than several times its current at full load condition. The effect of this to other is necessary tripping of circuit breakers. One way of reducing the high starting current of a motor is the start the motor with the low voltage at its winding. After a few seconds, when the motor is already running at its stable condition, the rated full voltage is applied to its winding. This system is called reduced voltage starting.

Wednesday, 16 March 2016

Delayed Automatic Forward Reverse Motion of Overhead Crane Driven by a Motor

, No comments
This is another situation that requires the overhead crane to rest for a while upon reaching both of the rail. After a pre-determine time the overhead crane will re-start in the opposite direction. The control circuit of this system is shown in Figure 8. Two times TR1...
Share:
Read More

Automatic Forward and Reverse Motion of Overhead Crane Driven by a Motor

, 1 comment
Notice that when contact (1-2) of limit switch X opens to de-energized contactor F, its contact (1-3) will almost simultaneously closed to energized the contactor R. This will bring about the automatic reversal of the overhead crane from the left to the right.  On...
Share:
Read More

Limiting the Forward and Reverse Motion of an overhead crane driven by a motor

, No comments
The motion of an overhead crane moving forward and reverse can be automatically stop at both end by placing a limit switches X and Y in the control circuit of the Forward – Reverse Motor Control shown in Figure below (d). Refer to Figure below (d). When contractor F is...
Share:
Read More

Monday, 14 March 2016

Forward Reverse Motor Control

, No comments
The forward reverse motor control is used i a system where forward and backward or upward and downward movement in the operation are needed. An example of which are shown in figures below (a) and (b). Figure below (a) shows forward and...
Share:
Read More

Saturday, 12 March 2016

WYE-DELTA REDUCE VOLTAGE STARTER

, No comments
Normal 0 false false false EN-GB X-NONE X-NONE ...
Share:
Read More

TWO STATION MOTOR CONTROL

, No comments
Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Most often a motor is controlled from two locations as shown in figure below. The stations are station...
Share:
Read More
Powered by Blogger.